7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 583
global-res-profile
Syntax global-res-profile [detail]
global-res-profile {active | configured}
Context show>system
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Sx/S 1/10GE: standalone-VC
Description This command displays the parameters and resources configured under the global system
resource-profile.
Output The following output is an example of global system resource profile information, and
Table 68 describes the output fields.
Sample Output
*7210SASR>show>system# global-res-profile
============================================================================
System Global Resource Profile
============================================================================
----------------------------------------------------------------------------
G8032 Fast Flood : 5
Eth-Cfm Vpls Upmeps : 0
Mpls P2MP : 1
Max-ipv6-routes : disable
System-max-ecmp : 1
L3-max-ecmp-groups : 1945
Ldp-max-ecmp-groups : disable
Ldp-ecmp-percent-value : disable
Max-ip-subnets : 2000
port-scheduler-mode : disable
----------------------------------------------------------------------------
*7210R>show>system#
Number of scheduled
failures
Displays the number of scheduled sessions that failed to execute
Last scheduled failure Displays the last scheduled session that failed to execute
Last failure time Displays the system time of the last failure
Table 67 Output Fields: Cron Schedule (Continued)
Label Description