Nokia 7210 SAS-M User Manual

System Management
584
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
information
Syntax information
Context show>system
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays general system information including the operating mode, basic
system, SNMP server, last boot and DNS client information.
Output The following outputs are examples of system information, and Table 69 describes the output
fields.
• Sample Output
• Sample Output for 7210 SAS-Sx/S 1/10GE (standalone)
• Sample Output for 7210 SAS-Sx/S 1/10GE (standalone-VC)
Sample Output
===============================================================================
System Information
===============================================================================
System Name : PE4-M2
System Type :
System Version : B-9.0.F-private
Table 68 Output Fields: Global System Resource Profile
Label Description
G8032 Fast Flood Displays the resources configured for use by G8032 fast-flood
feature
Mpls P2MP Displays the resources configured for NG-MVPN P2MP LSPs
Max-ipv6-routes The amount of L3 forwarding table entries configured for IPv6 /
64-bit address prefix lookups
System-max-ecmp The maximum number of ECMP paths allowed per IP destination
or LDP FEC
Max-ip-subnets The amount of L3 forwarding entries configured for use by IP
subnets of the directly connected interfaces (both IPv4 and IPv6
interfaces)
port-scheduler-mode The scheduler mode configured for use on egress
It can be either port-based (port-scheduler-mode is enabled) or
SAP-based (port-scheduler-mode is disabled).

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English