7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 599
*A:7210SAS>show>system# oper-group test monitoring
===============================================================================
System Oper Group Information
===============================================================================
Oper Group : test
Creation Origin : manual Oper Status : up
Hold DownTime : 0 secs Hold UpTime : 4 secs
Members : 0 Monitoring : 0
===============================================================================
*A:7210SAS>show>system#
rollback
Syntax rollback [rescue]
Context show>system
Supported
Platforms
7210 SAS-R6, 7210 SAS-R12, and 7210 SAS-Mxp
Description This command displays rollback configuration and state.
Parameters rescue — Keyword to revert to the rescue checkpoint.
Output The following output is an example of rollback configuration and state information, and
Table 73 describes the output fields.
Sample Output
A:7210SAS>show>system# rollback
===============================================================================
Rollback Information
Table 72 Output Fields: Oper-group
Label Description
Name Displays the name of the oper-group
Oper Status The operational status of the oper-group
Creation Origin Displays if it was created manually
Hold Up Time The configured HOLD UP time
Hold Dn Time The configured HOLD down time
Members Displays the number of members of the oper-group
Monitor Displays the number of monitoring clients
To Next Page
Loading...
Need help?
General
