System Management
620
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
1.2.1.20 rx+tx up master no
1.3.1.19 rx up slave yes
2
1.1.1.21 tx n/a master no
-------------------------------------------------------------------------------
No. of PTP Peers: 4
===============================================================================
*A:bksim1618# show system ptp peers router Base
===============================================================================
IEEE 1588/PTP Peer Information
===============================================================================
Router
IP Address Anno Flow Admin State PTP Port State Parent Clock
-------------------------------------------------------------------------------
Base
1.4.1.21 tx n/a master no
-------------------------------------------------------------------------------
No. of PTP Peers: 1
===============================================================================
*A:bksim1618# show system ptp peers router 1
===============================================================================
IEEE 1588/PTP Peer Information
===============================================================================
Router
IP Address Anno Flow Admin State PTP Port State Parent Clock
-------------------------------------------------------------------------------
1
1.2.1.20 rx+tx up master no
1.3.1.19 rx up slave yes
-------------------------------------------------------------------------------
No. of PTP Peers: 2
===============================================================================
Table 76 Output Fields: PTP Peer
Label Description
Router Displays the router
IP Address Displays the IP address
Announce Direction Displays the direction of flow of announce packets
Admin State Up — the PTP peer clock is administratively enabled
Down — the PTP peer clock is administratively shut down and
not running
Sync Interval Displays the configured sync interval value
Local PTP Port Displays the local PTP port
PTP Port State Displays the PTP port state: initializing, listening, uncalibrated,
slave, master, or passive
Remote PTP Port Displays the PTP port number at the remote end