System Management
640
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
Provisioned type : SFC1D
Equipped type : Equipped (SFC1D)
Part Number : 3KC19289AEAA01
CLEI code : ----------
Unit Mnemonic : SFC1D
Serial Number : EZ121130171
Manufacturing Date : 03192012
Operational state : UP
Firmware version : --------------
Current Alarm state : Cleared
===========================================================================
1830 VWM Slot/Module Hardware Data
===========================================================================
Slot Number : 2
Provisioned type : SFC2A&B
Equipped type : Equipped (SFC2A&B)
Part Number : 3KC19289AKAA
CLEI code : WOCUAZNUTA
Unit Mnemonic : SFC2A&B
Serial Number : EZ120630634
Manufacturing Date : 12122000
Operational state : UP
Firmware version : --------------
Current Alarm state : Cleared
===========================================================================
*7210SAS#
Table 84 Output Fields: VWM-shelf
Label Description
Shelf-ID Configured shelf-ID for the 1830 VWM shelf connected to the
7210 SAS
It must match the rotary dial setting on the 1830 device
USB/l2C Type of connection used to connect to the 1830 VWM shelf
Admin State Up — The shelf is administratively enabled
Down — The shelf is administratively disabled
Oper State Operational state of the shelf
It is set to Up if the admin state is Up and the 7210 SAS node is
able to communicate successfully with the shelf.
Number of Equipped
slots
Number of line cards in use on the shelf
Slot-ID Card identifier used to identify the card inserted into the slot #1 of
the 1830 device
Provisioned Type User provisioned card-type to identify the module inserted into
the 1830 device