7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 641
time
Syntax time
Context show
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays the current day, date, time and time zone.
The time is displayed either in the local time zone or in UTC depending on the setting of the
root level time-display command for the console session.
Output The following output is an example of time information.
Sample Output
A:ALA-49# show time
Tue Oct 31 12:17:15 GMT 2006
Equipped Type The card-type currently inserted into the slot on the 1830 device
No of Slots The number of slots available on the 1830 device
Part Number The 1830 VWM CWDM device part number
CLEI code CLEI code of the 1830 device
Unit Mnemonic The Mnemonic string used to identify the card
Serial Number The 1830 device serial number
Manufacturing Date The manufacturing date of the card
Administrative state The administrative state of the 1830 device
If the shelf or card is provisioned and if no shutdown is executed,
the this field displays UP, else it displays 'Down'.
Operational state The operational state of the 1830 device
It is set to UP if the 7210 SAS device is able to communicate and
retrieve information from the 1830 device connected to it. It is set
to Down otherwise.
Current Alarm state Displays if alarm is active or cleared
Table 84 Output Fields: VWM-shelf (Continued)
Label Description
To Next Page
Loading...
Need help?
General
