Nokia 7210 SAS-M - Page 647

7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
System Management
Edition: 01 3HE 16132 AAAB TQZZA 647
multi-chassis
Syntax multi-chassis
Context show>redundancy
Supported
Platforms
7210 SAS-M, 7210 SAS-T, 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210SAS-Sx/
S 1/10GE, and 7210 SAS-Sx 10/100GE
Description This command enables the context to display multi-chassis redundancy information.
all
Syntax all [detail]
Context show>redundancy>multi-chassis
Supported
Platforms
7210 SAS-M, 7210 SAS-T, 7210 SAS-Mxp, 7210 SAS-R6, 7210 SAS-R12, 7210SAS-Sx/
S 1/10GE, and 7210 SAS-Sx 10/100GE
Description This command displays brief multi-chassis redundancy information.
Parameters detail — Displays detailed multi-chassis redundancy information.
Output The following output is an example of redundancy multi-chassis information, and Table 86
describes the output fields.
Sample Output
B:Dut-B# show redundancy multi-chassis all
===============================================================================
Multi-chassis Peer Table
===============================================================================
Peer
-------------------------------------------------------------------------------
Peer IP Address : 10.10.10.2
Description : Mc-Lag peer 10.10.10.2
Authentication : Disabled
Source IP Address : 0.0.0.0
Admin State : Enabled
===============================================================================
B:Dut-B#
B:Dut-B# show lag detail
===============================================================================
LAG Details
===============================================================================
LAG 1
-------------------------------------------------------------------------------
Description: Description For LAG Number 1
-------------------------------------------------------------------------------
Details
-------------------------------------------------------------------------------