Nokia 7210 SAS-M User Manual

System Management
652
7210 SAS-M, T, R6, R12, Mxp, Sx, S Basic System
Configuration Guide
3HE 16132 AAAB TQZZA Edition: 01
uptime
Syntax uptime
Context show
Supported
Platforms
Supported on all 7210 SAS platforms as described in this document, including platforms
configured in the access-uplink operating mode
Description This command displays the time since the system started.
Output The following output is an example of uptime information, and Table 89 describes the output
fields.
Sample Output
A:ALA-1# show uptime
System Up Time : 11 days, 18:32:02.22 (hr:min:sec)
A:ALA-1#
Failover Time Displays the timestamp when the last redundancy failover
occurred causing a switchover from active to standby CSM
If there is no redundant CSM card in this system or no failover has
occurred since the system last booted, the value will be 0.
Failover Reason Displays a text string giving an explanation of the cause of the last
redundancy failover
If no failover has occurred, an empty string displays.
Boot/Config Sync
Mode
Displays the type of synchronization operation to perform
between the primary and secondary CSMs after a change has
been made to the configuration files or the boot environment
information contained in the boot options file (BOF)
Boot/Config Sync
Status
Displays the results of the last synchronization operation between
the primary and secondary CSMs
Last Config File Sync
Time
Displays the timestamp of the last successful synchronization of
the configuration files
Last Boot Env Sync
Time
Displays the timestamp of the last successful synchronization of
the boot environment files
Table 88 Output Fields: Synchronization (Continued)
Label Description

Nokia 7210 SAS-M Specifications

General

Brand	Nokia
Model	7210 SAS-M
Category	Cell Phone
Language	English