Nokia 7368 ISAM ONT G-240W-J - Page 106

Configure a G-240W-J indoor ONT 7368 ISAM ONT G-240W-J Product Guide
106 3FE-48009-AAAA-TCZZA Issue: 01
Transmitting Power
Choose a percentage for the transmitting power from the drop-down menu:
• Low (20%)
• Medium (40%)
• High (60%)
• Maximum (100%)
WMM
Choose Enable or Disable from the drop-down menu to enable or disable WiFi
multi-media
Total MAX Users
Enter the total number of MAX users
DFS re-entry
Choose Enable or Disable from the drop-down menu to enable or disable DFS
re-entry
SSID
Configuration
SSID Select
Choose the SSID from the drop-down menu
SSID Name
Change the name of the selected SSID
Enable SSID
Choose Enable or disable SSID from this drop-down menu
SSID Broadcast
Choose Enable or disable SSID broadcast from this drop-down menu
MAX Users
Enter the number of MAX users
Encryption Mode
Choose an encryption mode from the drop-down menu:
• OPEN
• WEP
• WPA/WPA2 Personal
• WPA/WPA2 Enterprise
(1) (2)
WPA Key
Enter the WPA key
Enable WPS
Choose Enable or disable WPS from this drop-down menu
WPS Mode
Choose a WPS mode from the drop-down menu: PBC (Push Button Connect)
or PIN (Personal Identification Number)
(2 of 2)
Notes
(1)
When Encryption Mode is set to “WPA/WPA2 Enterprise”, the following options are no longer available: WPA
version, WPA encryption mode, WPA key, Enable WPS, WPS mode.
(2)
When Encryption Mode is set to “WPA/WPA2 Enterprise”, the following options become available: Primary
RADIUS server, port and password; Secondary RADIUS server, port, and password; RADIUS accounting
port.
2 Configure the WiFi connection.
3 If you have enabled and configured WPS, click WPS connect.