Nokia 7368 ISAM ONT G-240W-J - Safety-Related Labels; ANSI CPE Safety Guidelines

7368 ISAM ONT G-240W-J Product Guide ANSI CPE safety guidelines
Issue: 01 3FE-48009-AAAA-TCZZA 17
Do not proceed beyond a warning until the indicated conditions are fully understood
and met.
The following is an example of the Caution box.
Caution 1 — Possibility of service interruption.
Caution 2 — Service interruption.
The Caution box indicates that the described activity or situation may, or will, cause
service interruption.
Do not proceed beyond a caution until the indicated conditions are fully understood
and met.
The following is an example of the Note box.
Note — Information of special interest.
The Note box provides information that assists the personnel working with devices.
It does not provide safety-related instructions.
2.1.2 Safety-related labels
The customer premises equipment is labeled with specific safety compliance
information and instructions that are related to a variant of the CPE. Observe the
instructions on the safety labels.
Table 1 provides examples of the text in the various CPE safety labels.
Table 1 Safety labels
Label text
Description
ETL compliance
Communication service equipment US listed.
ESD warning
Caution: This assembly contains electrostatic sensitive device.
FCC standards compliance
Tested to comply with FCC standards for home or office use.
Figure 1 shows a sample safety label located on the bottom of the G-240W-J.
Figure 1 Sample safety label