Nokia 7368 ISAM ONT G-240W-J - SLID Configuration Window; Table 53 LOID Configuration Parameters

Configure a G-240W-J indoor ONT 7368 ISAM ONT G-240W-J Product Guide
148 3FE-48009-AAAA-TCZZA Issue: 01
Figure 63 LOID Config window
Table 53 describes the fields in the LOID configuration window.
Table 53 LOID configuration parameters
Field
Description
LOID
Type the LOID; the maximum number of characters is 24
If the password is null, this field may be left blank
Password
Type the password; the maximum number of characters is 12
Procedure 45 SLID configuration
1 Select Maintenance > SLID Configuration from the top-level menu in the GPON Home
Gateway window, as shown in Figure 64.
2
Configure the LOID.
3
Click Save/Apply.
4
STOP. This procedure is complete.