Nokia 7368 ISAM ONT G-240W-J - Page 116

Configure a G-240W-J indoor ONT 7368 ISAM ONT G-240W-J Product Guide
116 3FE-48009-AAAA-TCZZA Issue: 01
(1 of 2)
Field
Description
Forwarding Policy
Enter the number for the forwarding policy (range: 1-7)
Additional fields for L3
Protocol
Choose a protocol from the drop-down menu, or select the Exclude checkbox
Application
Choose an application from the drop-down menu
Source IP and
Source IP Mask
Enter the values for the source IP and IP mask, or select the Exclude checkbox
Destination IP and
Destination IP Mask
Enter the values for the destination IP and IP mask, or select the Exclude checkbox
Source Port and
Source Port Max
Enter the values for the source port and port max (highest port number) or select the
Exclude checkbox
Destination Port and
Destination Port Max
Enter the values for the destination port and port max (highest port number), or select
the Exclude checkbox
Procedure 27 Upstream (US) Classifier configuration
The US Classifier feature is used to create policies, classifiers, and classifier rules for upstream
traffic handling. This feature is available to admin users (super users) only.
A policy defines an action to be performed on a set of LAN or WAN packets. A policy can be
created at any time and then subsequently assigned to one or more classifiers.
A classifier is used to select key fields for which the classifier rules will be written. A classifier
can be created at any time and then subsequently assigned to one or more classifier rules.
A classifier rule is used to assign actions to a group of packets based on a set of parameters. A
classification rule must be created against a pre-defined classifier.
Up to 16 policies can be created, with up to 8 classifiers and 32 classifier rules.
2
Choose a QoS type from the drop-down menu: L2 or L3.
3
Configure a QoS policy.
4
Click Add to add a QoS policy.
5
STOP. This procedure is complete.
(2
of
2)