Configure a G-240W-J indoor ONT 7368 ISAM ONT G-240W-J Product Guide
96 3FE-48009-AAAA-TCZZA Issue: 01
This field appears if you selected the “Static” option for the “prefix config” field.
Type a connection.
Select this checkbox to enable the LAN connection
Choose a prefix config option from the drop-down menu, either
WANConnection (prefix will be obtained from the WAN) or Static (enables you
to enter the prefix).
Choose a WAN interface from the drop-down menu
Choose a WAN prefix from the drop-down menu
Select this checkbox to enable the DHCPv6 Server connection
This field appears if you selected the “Static” option for the “prefix config” field.
Type a connection.
This field appears if you selected the “Static” option for the “prefix config” field.
Type a connection.
Whether the address info
through DCHP
Select this checkbox to enable address information retrieval through DHCP.
Whether other info obtained
through DHCP
Select this checkbox to enable retrieval of other information through DHCP.
Maximum interval for
periodic RA messages
Enter the maximum interval (in seconds) for periodic Router Advertisement
messages. The interval range is from 4 to 1800.
Minimum interval for
periodic RA messages
Enter the minimum interval (in seconds) for periodic Router Advertisement
messages. The interval range is from 4 to 1800.
(2 of 2)
2 Choose a DNS server, prefix config, and interface.
3 Select or enter the DHCP configuration information.
Enter the maximum and minimum intervals for RA messages.
STOP. This procedure is complete.
To Next Page
Loading...
