Nokia 7705 - Page 122

Security
122
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
The no form of the command removes the minimum required characters from each character
class.
Default no required
Parameters count — the minimum number of characters required from the character class
Values 0 to 10
health-check
Syntax [no] health-check [interval interval]
Context config>system>security>password
Description This command specifies that RADIUS and TACACS+ servers are monitored for 3 s each
during every polling interval. Servers that are not configured will have 3 s of idle time. If a
server is found to be unreachable, or a previously unreachable server starts responding,
depending on the type of server, a trap will be sent.
The no form of the command disables the periodic monitoring of the RADIUS and TACACS+
servers. In this case, the operational status for the active server will be up if the last access
was successful.
Default 30
Parameters interval — the polling interval for RADIUS and TACACS+ servers, in seconds
Values 6 to 1500
history-size
Syntax history-size size
no history-size
Context config>system>security>password
Description This command configures the number of previous passwords to save in the system. A new
password is matched against every old password and is rejected if it is identical to a password
in the history.
The no form of the command prevents password history matching.
Default no history-size
Parameters size — specifies how many previous passwords are stored in the history
Values 1 to 20