Nokia 7705 - 5.10.2 Configuring a File ID

Event and Accounting Logs
268
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
The following displays an example of the event log file configuration command
syntax:
Example: config# log
config>log# log-id 2
config>log>log-id$ description "This is a test log file."
config>log>log-id# filter 1
config>log>log-id# from main security
config>log>log-id# to file 1
config>log>log-id# no shutdown
config>log>log-id# exit
The following displays a log file configuration:
ALU-12>config>log>log-id# info
----------------------------------------------
...
log-id 2
description "This is a test log file."
filter 1
from main security
to file 1
exit
...
----------------------------------------------
ALU-12>config>log>log-id#
5.10.2 Configuring a File ID
To create a log file, a file ID is defined that specifies the target compact flash drive
and the rollover and retention interval period for the file. The rollover interval is
defined in minutes and determines how long a file will be used before it is closed and
a new log file is created. The retention interval determines how long the file will be
stored on the compact flash drive before it is deleted.
The minimum amount of free space for log files on a compact flash drive is the lesser
of 10% of the compact flash disk capacity or 5 Mb (5 242 880).
Use the following CLI syntax to configure a log file ID:
CLI Syntax: config>log
file-id log-file-id
description description-string
location cflash-id
rollover minutes [retention hours]