Nokia 7705 - 4.6 Basic SNMP Security Configuration

SNMP
200
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
4.6 Basic SNMP Security Configuration
This section provides information to configure SNMP parameters and provides
examples of common configuration tasks. The minimal SNMP parameters are:
For SNMPv1 and SNMPv2c:
• Configure community string parameters
For SNMPv3:
• Configure view parameters
• Configure SNMP group
• Configure access parameters
• Configure user with SNMP parameters
The following displays SNMP default views, access groups, and attempts
parameters.
ALU-1>config>system>security>snmp# info detail
----------------------------------------------
view iso subtree 1
mask ff type included
exit
view “mgmt-view” subtree 1.3.6.1.2.1.2
mask ff type excluded
exit
view “mgmt-view” subtree 1.3.6.1.2.1.4
mask ff type included
exit
view no-security subtree 1.3.6.1.6.3.11.2.1
mask ff type included
exit
view no-security subtree 1.3.6.1.6.3.15.1.1
mask ff type included
exit
access group snmp-ro security-model snmpv1 security-level no-auth-
no-privacy read no-security notify no-security
access group snmp-ro security-model snmpv2c security-level no-auth-
no-privacy read no-security notify no-security
access group snmp-rw security-model snmpv1 security-level no-auth-
no-privacy read no-security write no-security notify no-security
access group snmp-rw security-model snmpv2c security-level no-auth-
no-privacy read no-security write no-security notify no-security
access group snmp-rwa security-model snmpv1 security-level no-auth-
no-privacy read iso write iso notify iso
access group snmp-trap security-model snmpv1 security-level no-auth-
no-privacy notify iso
access group snmp-trap security-model snmpv2c security-level no-
auth-no-privacy notify iso
attempts 20 time 5 lockout 10