Nokia 7705 - 3.9.6 Configuring Users

System Management Guide Security
Edition: 01 3HE 11018 AAAC TQZZA 53
exit
3.9.6 Configuring Users
Access parameters are configured for individual users. For each user, the login name
and, optionally, information that identifies the user is defined. Use the following CLI
syntax to configure access parameters for users. The snmp authentication
des-key keyword is not available if the 7705 SAR node is running in FIPS-140-2
mode).
CLI Syntax: config>system>security
user-template template-name
user user-name
access [ftp] [snmp] [console]
console
cannot-change-password
login-exec url-prefix:source-url
member user-profile-name [user-profile-
name...(up to 8 max)]
new-password-at-login
home-directory url-prefix [directory]
[directory/directory ..]
password [password]
restricted-to-home
snmp
authentication {[none] | [[hash] {md5 key-
1 | sha key-1} privacy {none | des-key
key-2 | aes-128-cfb-key key-2}]}
group group-name
The following displays an example of the command usage.
Example: config>system>security
config>system>security# user 49ers
config>system>security>user$ access ftp snmp console
config>system>security>user$ console
config>system>security>user>console# member default
ghost
config>system>security>user>console# new-password-at-
login
config>system>security>user>console# exit
config>system>security>user# password testuser1
config>system>security>user# restricted-to-home
config>system>security>user# exit