Nokia 7705 - 5.11.10 Deleting a Log Filter; 5.11.11 Modifying Event Control Parameters

System Management Guide Event and Accounting Logs
Edition: 01 3HE 11018 AAAC TQZZA 285
5.11.10 Deleting a Log Filter
Use the following CLI syntax to delete a log filter:
CLI Syntax: config>log
no filter filter-id
The following displays an example of the command to delete a log filter:
Example: config>log# no filter 1
5.11.11 Modifying Event Control Parameters
Use the following CLI syntax to modify event control parameters:
CLI Syntax: config>log
event-control application-id [event-name | event-
number] generate [severity-level] [throttle]
event-control application-id [event-name | event-
number] suppress
The following displays the current event control configuration:
ALU-12>config>log# info
----------------------------------------------
...
event-control "atm" 2014 generate critical
...
----------------------------------------------
ALU-12>config>log#
The following displays an example of event control modifications:
Example: config# log
config>log# event-control atm 2014 suppress
The following displays the log filter configuration:
ALU-12>config>log# info
----------------------------------------------
...
event-control "atm" 2014 suppress
...
----------------------------------------------
ALU-12>config>log#