Event and Accounting Logs
276
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
5.11 Log Management Tasks
This section discusses the following logging tasks:
• Modifying a Log File
• Deleting a Log File
• Modifying a File ID
• Deleting a File ID
• Modifying a Syslog ID
• Deleting a Syslog ID
• Modifying an SNMP Trap Group
• Deleting an SNMP Trap Group
• Modifying a Log Filter
• Deleting a Log Filter
• Modifying Event Control Parameters
• Returning to the Default Event Control Configuration
5.11.1 Modifying a Log File
If the log destination needs to be changed or if the size of an SNMP log or memory
log needs to be modified, the log ID must be removed and then recreated.
Use the following CLI syntax to modify a log file:
CLI Syntax: config>log
log-id log-id
description description-string
filter filter-id
from {[main] [security] [change] [debug-
trace]}
to console
to file file-id
to memory [size]
to session
to snmp [size]
to syslog syslog-id
To Next Page
Loading...
