System Management Guide Event and Accounting Logs
Edition: 01 3HE 11018 AAAC TQZZA 269
The following displays an example of the log file ID configuration command syntax:
Example: config# log
config>log# file-id 1
config>log>file-id# description "This is a log file."
config>log>file-id# location cf3:
config>log>file-id# rollover 600 retention 24
The following displays the file ID configuration:
ALU-12>config>log# info
------------------------------------------
file-id 1
description "This is a log file."
location cf3:
rollover 600 retention 24
exit
----------------------------------------------
ALU-12>config>log#
5.10.3 Configuring an Accounting Policy
Before an accounting policy can be created, a target log file must be created to
collect the accounting records. The files are stored in system memory on the
compact flash drive in a compressed (tar) XML format and can be retrieved using
FTP or SCP. See Configuring an Event Log and Configuring a File ID.
Accounting policies must be configured in the config>log context before they can be
applied to a SAP or service interface, or applied to a network port. For information on
associating an accounting policy with a SAP or a network port, see the
7705 SAR Services Guide or the 7705 SAR Interface Configuration Guide
(respectively).
An accounting policy must define a record type and collection interval. Only one
record type can be configured per accounting policy.
When creating accounting policies, one service accounting policy and one network
accounting policy can be defined as default. If statistics collection is enabled on a
SAP or network port and no accounting policy is applied, the respective default policy
is used. If no default policy is defined, no statistics are collected unless a specifically
defined accounting policy is applied.
To Next Page
Loading...
