Nokia 7705 - 3.9.12.2 Configuring TACACS+ Authorization

Security
68
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
server 3 address 10.10.0.7 secret "h6.TeL7YPojGJqbYt85LVk" hash2
server 4 address 10.10.0.8 secret "h6.TeL7YPoiCfWKUFHARvk" hash2
server 5 address 10.10.0.9 secret "h6.TeL7YPojuCyTFvTNGBU" hash2
3.9.12.2 Configuring TACACS+ Authorization
In order for TACACS+ authorization to function, TACACS+ authentication must be
enabled first. See Enabling TACACS+ Authentication.
On the local router, use the following CLI commands to configure TACACS+
authorization:
CLI Syntax: config>system>security
tacplus
authorization
no shutdown
The following example displays the CLI syntax usage:
Example: config>system>security>
config>system>security# tacplus
config>system>security>tacplus# authorization
config>system>security>tacplus# no shutdown
The following example displays the TACACS+ authorization configuration:
ALU-1>config>system>security>tacplus# info
----------------------------------------------
authorization
timeout 5
server 1 address 10.10.0.5 secret "h6.TeL7YPohbmhlvz0gob." hash2
server 2 address 10.10.0.6 secret "h6.TeL7YPog7WbLsR3QRd." hash2
server 3 address 10.10.0.7 secret "h6.TeL7YPojGJqbYt85LVk" hash2
server 4 address 10.10.0.8 secret "h6.TeL7YPoiCfWKUFHARvk" hash2
server 5 address 10.10.0.9 secret "h6.TeL7YPojuCyTFvTNGBU" hash2
----------------------------------------------
ALU-1>config>system>security>tacplus#