Nokia 7705 - 5.12.2.2 Show Commands

Event and Accounting Logs
328
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
5.12.2.2 Show Commands
accounting-policy
Syntax accounting-policy [acct-policy-id] [access | network] [associations]
Context show>log
Description This command displays accounting policy information.
Parameters acct-policy-id — the policy ID that uniquely identifies the accounting policy, expressed as
a decimal integer
Values 1 to 99
access — only displays access accounting policies
network — only displays network accounting policies
associations — only displays accounting policy associations
Output The following output is an example of accounting policy information, and Table 42 describes
the fields.
Output Example
A:ALU-1# show log accounting-policy
==============================================================================
Accounting Policies
==============================================================================
Policy Type Def Admin Oper Intvl File Record Name
Id State State Id
------------------------------------------------------------------------------
1 access No Up Up 15 1 service-ingress-packets
2 access Yes Up Up 15 2 service-ingress-octets
==============================================================================
A:ALU-1#
A:ALU-1# show log accounting-policy 10
==============================================================================
Accounting Policies
==============================================================================
Policy Type Def Admin Oper Intvl File Record Name
Id State State Id
------------------------------------------------------------------------------
10 access Yes Up Up 5 3 service-ingress-packets
Description : (Not Specified)
Data Loss Count : 0 Data Loss TimeStamp: N/A
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.