System Management Guide Security
Edition: 01 3HE 11018 AAAC TQZZA 143
3.10.2.1.11 802.1x Commands
dot1x
Syntax [no] dot1x
Context config>system>security
Description This command enables the context to configure 802.1x network access control on the
7705 SAR.
The no form of the command removes the 802.1x configuration.
radius-plcy
Syntax [no] radius-plcy name [create]
Context config>system>security>dot1x
Description This command enables the context to configure RADIUS server parameters for 802.1x
network access control on the 7705 SAR.
The RADIUS server configured under the config>system>security>dot1x>radius-plcy
context authenticates clients who get access to the data plane of the 7705 SAR. This
configuration differs from the RADIUS server configured under the
config>system>security>radius context that authenticates CLI login users who get access
to the management plane of the 7705 SAR.
The no form of the command removes the RADIUS server configuration for 802.1x.
Parameters name — the RADIUS policy name, up to 32 characters
create — keyword required when first creating the configuration context. When the
context is created, you can navigate into the context without the create keyword.
retry
Syntax retry count
no retry
Context config>system>security>dot1x
Description This command configures the number of times the router attempts to contact the RADIUS
server for authentication if there are problems communicating with the server.
The no form of the command reverts to the default value.
To Next Page
Loading...
