Security
176
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
password-options
Syntax password-options
Context show>system>security
Description This command displays configured password options.
Output The following output is an example of password options information, and Table 16 describes
the fields.
Output Example
A:ALU-7# show system security password-options
===============================================================================
Password Options
===============================================================================
Password aging in days : none
Time required between password changes : 0d 00:10:00
Number of invalid attempts permitted per login : 3
Time in minutes per login attempt : 5
Lockout period (when threshold breached) : 10
Authentication order : radius tacplus local
User password history length : disabled
Accepted password length : 6..56 characters
Credits for each character class : none
Number of required characters per class : none
Minimum number of required character classes : 0
Required distance with previous password : 5
Allow consecutively repeating a character : always
Allow passwords containing username : no
Palindrome allowed : no
===============================================================================
A:ALU-7#
Src interface The interface name for the next hop to which the packet should
be forwarded if it hits this filter entry
Dest port The destination port
Next-header The next header ID to match. Undefined indicates no next header
is specified. (IPv6 filters only)
Protocol The IP protocol to match (IPv4 filters only)
Action The action to take for packets that match this filter entry
Matches The number of times a management packet has matched this
filter entry
Table 15 Show Management Access Filter Output Fields (Continued)
Label Description
To Next Page
Loading...
