System Management Guide SNMP
Edition: 01 3HE 11018 AAAC TQZZA 217
The no form of the command resets the parameters to the default values.
Default attempts 20 time 5 lockout 10
Parameters count — the number of unsuccessful SNMP attempts allowed for the specified time
Values 1 to 64
Default 20
time minutes1 — the period of time, in minutes, that a specified number of unsuccessful
attempts can be made before the host is locked out
Values 0 to 60
Default 5
lockout minutes2 — the lockout period, in minutes, during which the host is not allowed
to log in. When the host exceeds the attempted count times in the specified time, then
that host is locked out from any further login attempts for the configured time period.
Values 0 to 1440
Default 10
community
Syntax community community-string [hash | hash2] access-permissions [version SNMP-version]
no community community-string [hash | hash2]
Context config>system>security>snmp
Description This command creates SNMP community strings for SNMPv1 and SNMPv2c access. This
command is used in combination with the predefined access groups and views. To create
custom access groups and views and associate them with SNMPv1 or SNMPv2c access, use
the usm-community command.
When configured, community implies a security model for SNMPv1 and SNMPv2c only.
For SNMPv3 security, the snmp command must be configured.
The no form of the command removes a community string.
Default n/a
Parameters community-string — configures the SNMPv1/SNMPv2c community string
hash1 | hash2 — configures the hashing scheme for the community string
access-permissions — defines the access permissions
Values • r — grants only read access to objects in the MIB, except
security objects
To Next Page
Loading...
