SNMP
222
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
information
Syntax information
Context show>system
Description This command lists the SNMP configuration and statistics.
Output The following output is an example of system information, and Table 24 describes the fields.
Output Example
A:ALU-1# show system information
===============================================================================
System Information
===============================================================================
System Name : ALU-1
System Type : 7705 SAR-8
System Version : B-0.0.I1204
System Contact :
System Location :
System Coordinates :
System Active Slot : A
System Up Time : 1 days, 02:12:57.84 (hr:min:sec)
SNMP Port : 161
SNMP Engine ID : 0000197f01119ff000000
SNMP Max Message Size : 1500
SNMP Admin State : Enabled
SNMP Oper State : Enabled
SNMP Index Boot Status : Not Persistent
SNMP Sync State : OK
Tel/Tel6/SSH/FTP Admin : Enabled/Disabled/Enabled/Disabled
Tel/Tel6/SSH/FTP Oper : Up/Down/Up/Down
in sets The number of SNMP set request PDUs accepted and processed
by SNMP
out packets The total number of SNMP messages passed from SNMP to the
transport service
out get responses The number of SNMP get response PDUs generated by SNMP
out traps The number of SNMP Trap PDUs generated by SNMP
variables requested The number of MIB objects requested by SNMP
variables set The number of MIB objects set by SNMP as the result of
receiving valid SNMP set request PDUs
Table 23 Show SNMP Counters Output Fields (Continued)
Label Description
To Next Page
Loading...
