SNMP
224
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
System Location The text string that identifies the location of the device
System Coordinates The text string that identifies the system coordinates for
the device location. For example, “37.390 -122.0550" is
read as latitude 37.390 north and longitude 122.0550
west.
System Up Time The time since the last reboot
SNMP Port The port that SNMP sends responses to management
requests
SNMP Engine ID The ID for either the local or remote SNMP engine to
uniquely identify the SNMPv3 node
SNMP Max Message Size The maximum size SNMP packet generated by this node
SNMP Admin State Enabled: SNMP is administratively enabled
Disabled: SNMP is administratively disabled
SNMP Oper State Enabled: SNMP is operationally enabled
Disabled: SNMP is operationally disabled
SNMP Index Boot Status Persistent: Persistent indexes was enabled at the last
system reboot
Disabled: Persistent indexes was disabled at the last
system reboot
SNMP Sync State The state when the synchronization of configuration files
between the primary and secondary CSMs finish
Tel/Tel6/SSH/FTP Admin The administrative state of the Telnet, Telnet IPv6, SSH,
and FTP sessions
Tel/Tel6/SSH/FTP Oper The operational state of the Telnet, Telnet IPv6, SSH, and
FTP sessions
BOF Source The boot location of the BOF
Image Source primary: specifies whether the image was loaded from the
primary location specified in the BOF
secondary: specifies whether the image was loaded from
the secondary location specified in the BOF
tertiary: specifies whether the image was loaded from the
tertiary location specified in the BOF
Table 24 Show System Information Output Fields (Continued)
Label Description
To Next Page
Loading...
