SNMP
226
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
access-group
Syntax access-group [group-name]
Context show>system>security
Description This command displays access group information.
Cfg-Fail Script URL: the location and name of the CLI script file executed
following a failed boot-up configuration file execution
Not used: no CLI script file was executed
Cfg-Fail Script Status Successful/Failed: the results from the execution of the
CLI script file specified in the Cfg-Fail Script location
Not used: no CLI script file was executed
Microwave S/W Package n/a
Management IP Addr The management IP address and mask
Primary DNS Server The IP address of the primary DNS server
Secondary DNS Server The IP address of the secondary DNS server
Tertiary DNS Server The IP address of the tertiary DNS server
DNS Domain The DNS domain name of the node
DNS Resolve Preference n/a
BOF Static Routes To: the static route destination
Next Hop: the next hop IP address used to reach the
destination
Metric: displays the priority of this static route versus other
static routes
None: no static routes are configured
ATM location ID For ATM OAM loopbacks — the address of the network
device referenced in the loopback request
ICMP Vendor
Enhancement:
Enabled — inserts one-way timestamp in outbound SAA
ICMP ping packets
Disabled — one-way timestamping is not performed on
outbound SAA ICMP ping packets
Table 24 Show System Information Output Fields (Continued)
Label Description
To Next Page
Loading...
