System Management Guide SNMP
Edition: 01 3HE 11018 AAAC TQZZA 229
user
Syntax user [user-id] [detail]
Context show>system>security
Description This command displays user information.
Parameters user-id — the name of the user
detail — displays all information associated with the specified use
Output The following output is an example of user information, and Table 27 describes the fields.
Output Example
A:ALU-1# show system security user
===============================================================================
Users
===============================================================================
user id New User Permissions Password Login Failed Local
Pwd console ftp snmp Expires Attempts Logins Conf
-------------------------------------------------------------------------------
admin n y n n never 2 0 y
testuser n n n y never 0 0 y
-------------------------------------------------------------------------------
Number of users : 2
===============================================================================
A:ALU-1#
Access r: The community string allows read-only access to all objects in
the MIB except security objects
rw: The community string allows read-write access to all objects
in the MIB except security objects
rwa: The community string allows read-write access to all objects
in the MIB including security objects
mgmt: The unique SNMP community string assigned to the
management router
View The view name
Version The SNMP version
Group Name The access group name
No of Communities The total number of configured community strings
Table 26 Show Communities Output Fields (Continued)
Label Description
To Next Page
Loading...
