System Management Guide Event and Accounting Logs
Edition: 01 3HE 11018 AAAC TQZZA 333
event-control
Syntax event-control [application-id [event-name | event-number]]
Context show>log
Description This command displays event control settings for events, including whether the event is
suppressed or generated and the severity level for the event.
If no options are specified, all events, alarms and traps are listed.
Parameters application-id — displays event control for the specified application only
Values aps, atm, bgp, chassis, debug, dhcp, dhcps, efm_oam, eth_cfm,
filter, firewall, igmp, igmp_snooping, ip, ipsec, isis, lag, ldp, lldp,
logger, mcpath, mc_redundancy, mirror, mld, mld_snooping, mpls,
mwmgr, ntp, oam, ospf, pim, pim_snooping, port, ppp, ptp, radius,
rip, rip_ng, route_policy, rsvp, security, snmp, stp, svcmgr, system,
tss, user, vrrp, vrtr
Default all applications
event-name — displays event control for the named application event only
Default all events for the application
event-number — displays event control for the specified application event number only
Values 0 to 4294967295
Default all events for the application
Output The following output is an example of event control information, and Table 44 describes the
fields. Because the output is very large, only a sample of the events are shown here.
Output Example
A:gal171# show log event-control
=======================================================================
Log Events
=======================================================================
Application
ID# Event Name P g/s Logged Dropped
-----------------------------------------------------------------------
ATM:
2004 tAtmTcSubLayerDown MI gen 0 0
2005 tAtmTcSubLayerClear MI gen 0 0
L 2006 atmVclStatusChange WA gen 0 0
...
CHASSIS:
2001 cardFailure MA gen 4 0
2002 cardInserted MI gen 3 0
2003 cardRemoved MI gen 8 0
2004 cardWrong MI gen 0 0
2005 EnvTemperatureTooHigh MA gen 0 0
2007 powerSupplyOverTemp CR gen 0 0
2008 powerSupplyAcFailure CR gen 0 0
To Next Page
Loading...
