Event and Accounting Logs
340
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
log-collector
Syntax log-collector
Context show>log
Description This command displays log collector statistics for the main, security, change and debug log
collectors.
Output The following output is an example of log collector statistics, and Table 48 describes the
fields.
Output Example
A:ALU-1# show log log-collector
===============================================================================
Log Collectors
===============================================================================
Main Logged : 1224 Dropped : 0
Dest Log Id: 99 Filter Id: 0 Status: enabled Dest Type: memory
Dest Log Id: 100 Filter Id: 1001 Status: enabled Dest Type: memory
Security Logged : 3 Dropped : 0
Change Logged : 3896 Dropped : 0
Debug Logged : 0 Dropped : 0
===============================================================================
A:ALU-1#
Operator: There is an operator field for each match criteria:
application, event number, severity, and subject
equal: matches when equal to the match criterion
greaterThan: matches when greater than the match criterion
greaterThanOrEqual: matches when greater than or equal to the
match criterion
lessThan: matches when less than the match criterion
lessThanOrEqual: matches when less than or equal to the match
criterion
notEqual: matches when not equal to the match criterion
off: no operator specified for the match criterion
Table 47 Filter ID Match Criteria Output Fields (Continued)
Label Description
To Next Page
Loading...
