System Management Guide Event and Accounting Logs
Edition: 01 3HE 11018 AAAC TQZZA 345
Memory or File Event Log Contents Output Example
A:gal171# show log log-id 99
===============================================================================
Event Log 99
===============================================================================
Description : Default System Log
Memory Log contents [size=500 next event=3722 (wrapped)]
3721 2008/02/07 09:14:06.69 UTC WARNING: SYSTEM #2006 Base LOGGER
"Log File Id 2 configuration modified"
3720 2008/02/07 09:13:18.86 UTC WARNING: SYSTEM #2006 Base LOGGER
"Log File Id 2 configuration modified"
3719 2008/02/01 11:54:15.67 UTC MINOR: IP #2004 management PIP MANAGEMENT
"ARP information overwritten for 138.120.52.253 by 00:e0:52:d4:a5:00"
3718 2008/02/01 11:54:15.40 UTC MINOR: IP #2004 management PIP MANAGEMENT
"ARP information overwritten for 138.120.52.253 by 00:e0:5e:00:a5:00"
...
===============================================================================
A:gal171
snmp-trap-group
Syntax snmp-trap-group [log-id]
Context show>log
Description This command displays SNMP trap group configuration information.
Parameters log-id — displays only SNMP trap group information for the specified trap group log ID
Values 1 to 100
Output The following output is an example of SNMP trap group information, and Table 50 describes
the fields.
Output Example
*A:ALU-48>config>log# show log snmp-trap-group
===============================================================================
SNMP Trap Groups
===============================================================================
id name
port address
-------------------------------------------------------------------------------
29 name
162 10.20.30.10
===============================================================================
*A:ALU-48>config>log#
*A:ALU-48>config>log# show log snmp-trap-group 90
===============================================================================
To Next Page
Loading...
