Security
86
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
3.10.2.1.1 Generic Security Commands
description
Syntax description description-string
no description
Context config>system>security>management-access-filter>ip-filter>entry
config>system>security>management-access-filter>ipv6-filter>entry
config>system>security>cpm-filter>ip-filter>entry
config>system>security>cpm-filter>ipv6-filter>entry
config>system>security>keychain
config>system>security>profile>entry
Description This command creates a text description stored in the configuration file for a configuration
context.
The no form of the command removes the string.
Default n/a
Parameters description-string — the description character string. Allowed values are any string up to
80 characters long composed of printable, 7-bit ASCII characters. If the string
contains special characters (#, $, spaces, etc.), the entire string must be enclosed
within double quotes.
shutdown
Syntax [no] shutdown
Context config>system>security>management-access-filter>ip-filter
config>system>security>management-access-filter>ipv6-filter
config>system>security>cpm-filter>ip-filter
config>system>security>cpm-filter>ipv6-filter
config>system>security>keychain
config>system>security>keychain>direction>bi>entry
config>system>security>keychain>direction>uni>receive>entry
config>system>security>keychain>direction>uni>send>entry
config>system>security>radius
config>system>security>tacplus
Description This command administratively disables the entity. The operational state of the entity is
disabled as well as the operational state of any entities contained within. When disabled, an
entity does not change, reset, or remove any configuration settings or statistics, other than
the administrative state. Many objects must be shut down before they can be deleted.
To Next Page
Loading...
