Nokia 7705 - Page 92

Security
92
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
3.10.2.1.3 Management Access Filter Commands
management-access-filter
Syntax [no] management-access-filter
Context config>system>security
Description This command enables the context to edit management access filters and to reset match
criteria.
Management access filters control all traffic in and out of the CSM. They can be used to
restrict management of the 7705 SAR by other nodes outside either specific (sub)networks
or through designated ports.
Management filters, as opposed to other traffic filters, are enforced by system software.
The no form of the command removes management access filters from the configuration.
Default n/a
ip-filter
Syntax ip-filter
Context config>system>security>management-access-filter
Description This command enables the context to configure IP filter commands.
ipv6-filter
Syntax ipv6-filter
Context config>system>security>management-access-filter
Description This command enables the context to configure IPv6 filter commands.