before, a list of the previous search results is
displayed. To search for more Bluetooth devices,
select More devices.
2. Select the device with which you want to pair, and
enter the passcode. The same passcode must be
entered to the other device as well.
3. Select Yes to make the connection between your
device and the other device automatic, or No to
confirm the connection manually every time a
connection attempt is made. After pairing, the
device is saved to the paired devices page.
To give a nickname to the paired device, select
Options > Assign short name. The nickname is only
displayed in your device.
To delete a pairing, select the device whose pairing you
want to delete and Options > Delete. To delete all
pairings, select Options > Delete all. If you are
currently connected to a device and cancel the pairing
with that device, pairing is removed immediately, and
the connection is ended.
To allow a paired device to connect automatically to
your device, select Set as authorised. Connections
between your device and the other device can be made
without your knowledge. No separate acceptance or
authorisation is needed. Use this status for your own
devices, such as your compatible headset or computer,
or devices that belong to someone you trust. If you
want to accept connection requests from the other
device separately every time, select Set as
unauthorised.
To use a Bluetooth audio accessory such as a Bluetooth
handsfree or headset, you need to pair your device with
the accessory. For the passcode and further
instructions, see the accessory user guide. To connect
to the audio accessory, switch on the accessory. Some
audio accessories connect automatically to your
device. Otherwise, open the paired devices tab, select
the accessory and Options > Connect to audio
device.
Block devices
Select Menu > Control panel > Connectivity >
Bluetooth.
To block a device from establishing a Bluetooth
connection to your device, open the paired devices tab.
Select a device you want to block and Options >
Block.
To unblock a device, open the blocked devices tab, and
select Options > Delete. To unblock all blocked
devices, select Options > Delete all.
If you reject a pairing request from another device, you
are asked if you want to block all future connection
requests from this device. If you accept the query, the
remote device is added to the list of blocked devices.
Security tips
When you are not using Bluetooth connectivity, select
Bluetooth > Off or My phone's visibility >
Hidden.
Do not pair with an unknown device.
131
Connectivity
To Next Page
Loading...
