service with voice guidance. These services are not
available for all countries or regions.
When you use Maps for the first time, you may need to
select an internet access point for downloading maps.
If you browse to an area which is not covered by maps
already downloaded in your device, a map for the area
is automatically downloaded through the internet.
Some maps may be available in your device or memory
card. You can also use the Nokia Map Loader PC
software to download maps. To install Nokia Map
Loader to a compatible PC, go to http://
maps.nokia.com.
Tip: To avoid data transfer costs, you can also
use Maps without an internet connection, and
browse the maps that are saved in your device
or memory card.
Downloading maps and extra services may involve the
transmission of large amounts of data through your
service provider's network. For more information on
data transmission charges, contact your service
provider.
Network positioning
Select Menu > Applications > GPS > Maps.
You can use the mobile network to find your current
location, even indoors. This is faster but less accurate
than with GPS, and you cannot use the location as a
starting point for navigation.
To use the mobile network for positioning, select the
network-based positioning method from the device
settings. When you start the Maps application and your
GPS connection is ready, GPS replaces mobile network
as the positioning method.
Move on a map
Select Menu > Applications > GPS > Maps.
To zoom in to your GPS position or your last known
location, select Options > My position.
When the GPS connection is active,
shows your
current location on the map.
To move on the map, scroll up, down, left, or right with
the scroll key. The map is oriented towards north by
default.
When you have an active connection and browse the
map, a new map is automatically downloaded if you
scroll to an area which is not covered by maps already
downloaded. The maps are automatically saved in the
device memory or on a compatible memory card (if
inserted).
To zoom in and out on the map with the keypad, press
* and #. To zoom in and out on the map with the
keyboard, press the Shift and backspace keys.
Display indicators
The GPS indicator shows the availability
and strength of the satellite signal. One bar is one
satellite. When the device tries to find a satellite, the
bar is yellow. When the device receives enough data
from the satellite to establish a GPS connection, the bar
turns green. The more green bars, the stronger the GPS
connection.
89
Travelling
To Next Page
Loading...
