Nokia E75 - Edit VPN Access Points; Use a VPN Connection in an Application

• VPN policies — Install, view, and update VPN
policies.
• VPN policy servers — Edit the connection settings
of VPN policy servers from which you can install and
update VPN policies. A policy server refers to a Nokia
Security Service Manager (NSSM), which is not
necessarily required.
• VPN log — View the log for your VPN policy
installations, updates and synchronisations, and
other VPN connections.
Edit VPN access points
Select Menu > Control panel > Settings and
Connection > Network destinations.
An access point is where your phone connects to the
network. To use e-mail and multimedia services or to
browse web pages you must first define internet access
points for these services. VPN access points pair VPN
policies with regular internet access points to create
secure connections.
Your service provider may preset some or all access
points for your device, and you may not be able to
create, edit, or remove them.
Select a destination and Options > Edit, and define
the following:
• Connection name — Enter a name for the VPN
access point.
• VPN policy — Select the VPN policy to combine with
the internet access point.
• Internet access point — Select the internet access
point with which to combine the VPN policy to
create secure connections for data transfer.
• Proxy server address — Enter the proxy server
address of the private network.
• Proxy port number — Enter the proxy port
number.
• Use access point — Select whether connections
using this access point are established
automatically.
The settings available for editing may vary. For the
correct settings, contact your company's IT
department.
Use a VPN connection in an
application
You may have to prove your identity when you log on
to the enterprise network. Contact your company's IT
department for the credentials.
To use a VPN connection in an application, the
application must be associated with a VPN access point.
Tip: You can configure the application's
connection setting to Always ask, in which case
you select the VPN access point from a list of
connections when a connection is established.
1. In the application in which you want to create a VPN
connection, select a VPN access point as the access
point.
2. If you are using legacy authentication, enter your
VPN user name and passcode or password. If the
SecurID token has become out of synchronisation
with the clock of the ACE/Server, enter the next
passcode. If you are using certificate-based
146
Security and data management