SIM access profile
With the SIM access profile, you can access the SIM card
of your device from a compatible car kit device. This
way, you do not need a separate SIM card to access SIM
card data and connect to the GSM network.
To use the SIM access profile, you need the following:
• Compatible car kit device that supports Bluetooth
wireless technology
• Valid SIM card in your device
When the wireless device is in the remote SIM mode,
you can only use a compatible connected accessory,
such as a car kit, to make or receive calls.
Your wireless device will not make any calls, except to
the emergency numbers programmed into your device,
while in this mode.
To make calls from your device, you must first leave the
remote SIM mode. If the device has been locked, enter
the lock code to unlock it first.
For more information about car kit devices and
compatibility with your device, see the Nokia web site
and your car kit user guide.
Use the SIM access profile
1. Select Menu > Control panel > Connectivity >
Bluetooth and Remote SIM mode > On.
2. Activate Bluetooth connectivity in the car kit.
3. Use your car kit to start a search for compatible
devices. For instructions, see the user guide of your
car kit.
4. Select your device from the list of compatible
devices.
5. To pair the devices, enter the Bluetooth passcode
shown on the display of the car kit to your device.
Tip: If you have already accessed the SIM card
from the car kit with the active user profile, the
car kit searches automatically for a device with
the SIM card. If it finds your device, and
automatic authorisation is activated, the car kit
automatically connects to the GSM network
when you switch on the car ignition.
When you activate the remote SIM access profile, you
can use applications on your device that do not need
network or SIM services.
To make connections between your device and the car
kit without separate acceptance or authorisation,
select Menu > Control panel > Connectivity >
Bluetooth, and open the paired devices tab. Select the
car kit and Set as authorised, and answer Yes to the
confirmation query. If the car kit is set as unauthorised,
connection requests from it must be accepted
separately every time.
To end the remote SIM access connection from your
device, select Menu > Control panel >
Connectivity > Bluetooth and Remote SIM mode >
Off.
Wireless LAN
Some places, like France, have restrictions on the use
of wireless LAN. Check with your local authorities for
more information.
132
Connectivity
To Next Page
Loading...
