Nokia E75 - Make a Call; Launch an Application; Change Profiles; Voice Command Settings

The device creates a voice tag for the entries in Contacts
and for the functions designated in the Voice
commands application. When a voice command is
spoken, the device compares the spoken words to the
voice tag stored in the device. Voice commands are not
dependent on a speaker’s voice; however, the voice
recognition in the device adapts to the main user’s
voice to recognise voice commands better.
Make a call
A voice tag for a contact is the name or nickname that
is saved for the contact in the contacts list.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should
not rely solely upon voice dialling in all circumstances.
To listen to a voice tag, select a contact and Options >
Play voice tag.
1. To make a call using a voice command, press and
hold the mute key.
2. When you hear the tone or see the visual display,
clearly say the name saved for the contact.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout
of 1.5 seconds, the device dials the number. If the
recognised contact was not correct, select Next to
view a list of other matches, or Quit to cancel
dialling.
If several numbers are saved for the contact, the
device selects the default number, if it has been set.
Otherwise, the device selects the first available
number from the phone number fields.
Launch an application
The device creates voice tags for the applications listed
in the Voice commands application. You can also add
more applications to the list.
To launch an application using a voice command, press
and hold the mute key, and clearly say the name of the
application. If the recognised application was not
correct, select Next to view a list of other matches, or
Quit to cancel.
To change the voice command of an application, select
Options > Change command, and enter the new
command.
Change profiles
Select Menu > Control panel > Phone > Voice
comm..
The device creates a voice tag for each profile. To
activate a profile using a voice command, press and
hold the mute key in the home screen, and say the
name of the profile.
To change the voice command, select Profiles >
Options > Change command.
Voice command settings
Select Menu > Control panel > Phone > Voice
comm..
70
Phone