Nokia FastMile Outdoor Unit User Manual Installation procedure
Issue: 01P03 3TG-00088-AAAA-TCZZA 47
6.3 Installation prerequisites
Be sure to observe the following prerequisites before installing the Nokia FastMile
Outdoor Unit:
• Installation personnel must have knowledge about installing the unit
• A valid Nano/4FF SIM card is needed for the Nokia FastMile Outdoor Unit to
communicate with the LTE net
work
• If required, a Cat5e shielded Ethernet cable that can be connected to the Ethernet
ca
ble of the Nokia FastMile Outdoor Unit to make it longer, up to a maximum
of
40 m
(131 ft) in combined length
• A ground cable is needed if the Nokia FastMile Outdoor Unit will be grounded
se
parately from the indoor ground provided by the Ethernet cable; requir
es a hex
ke
y suitable for hex socket knurled head cup screw assemblies, ISO 4762-
M5X8
• Appropriate fasteners for securing the Nokia FastMile Outdoor Unit to an outside
w
a
ll
• Silicone or other waterproof sealing or caulking compound
• Mechanical tools are required (but are not included) for mounting the Nokia
Fas
tMile Outdoor Unit
:
• Phillips screwdriver to open the SIM slot
• hex key as described above if ground cable is needed
• The Nokia Field Assistant app must be installed on an Android mobile phone
t
hrough Google Play and the mobile phone must have a camera and hardware
compass and Android OS 6.0 (Marshmallow) or above
• The following certificates need to be stored in the download folder of the mobile
phone:
• pmaCA.pem
• logserverCA.pem
• diagserverCA.pem
• swserverCA.pem
• The LTE base station that will be used by the Nokia FastMile Outdoor Unit must
be available and functioning
• The indoor unit, such as a residential gateway like the Nokia 7368 ISAM CPE
A-
020W-A, that will be connecting to the Nokia FastMile Outdoor Unit must
be
av
ailable and reachable; if the indoor unit cannot supply PoE power to the Noki
a
Fas
tMile Outdoor Unit, then a Nokia-approved PoE injector must be used in
conjunction with the indoor unit
To Next Page
Loading...
