Nokia FastMile - Figure 9 Splash Screen

Nokia FastMile Outdoor Unit User Manual Installation procedure
Issue: 01P03 3TG-00088-AAAA-TCZZA 49
Procedure 6 To install the Nokia FastMile Outdoor Unit
1 Connect the mobile phone to the Internet and open the Nokia Field Assistant app on the
phone.
A splash screen appears on screen for a few seconds.
Figure 9 shows the splash screen.
Figure 9 Splash screen
While the splash screen is showing, you can:
• learn about the Nokia Field Assistant app by tapping on the “More” option
• get information about the open source software included in Nokia Field Assistant by
tapping on the “Open source licenses” option
2 After the splash screen has cleared, the Nokia Field Assistant app prompts you to scan the
QR code of the Nokia FastMile Outdoor Unit so that the app can access the MAC address,
serial number, and device type of the Nokia FastMile Outdoor Unit.
Tap on “Scan” to start the scan of the QR code.
Figure 10 shows the screen for preparing to scan the QR code.