Nokia NHM-1 Series - Phoenix Connection Manual Settings; FLS-4 S POS Flash Device Settings; FPS-8 Flash Prommer Settings

To Next Page

To Previous Page

CCS Technical Documentation

Company confidential NHM-1

Manual Settings

A) For FLS-4S POS Flash Device choose following connection settings:

Media: FBUS

COM Port: Virtual COM Port used by FLS-4S. Please check this always!

(To check please go to Windows / Control Panel / FLS Virtual Port / Configuration)

B) For FPS-8 Flash Prommer choose following connection settings:

Media: FPS-8

Port Num: COM Port where FPS-8 is connected

COMBOX_DEF_MEDIA: FBUS

Choose “Finish” to complete.

If you use the Wizard, connect the tools and a phone to your PC and the wizard will

automatically try to configure the correct connection.

Other manuals for Nokia NHM-1 Series