Nokia NHM-1 Series - RX Dtos Balance Calibration

To Next Page

To Previous Page

CCS Technical Documentation

NHM-1

RX DtoS Balance Calibration

• Extra equipment / external RF signal not needed

• RX Dtos Balance Calibration starts at EGSM (GSM900), then continues

at GSM1800 band

• This Calibration is used for calibrating DSP control words values.

Select Tuning => GSM => Rx DtoS Balance Calibration

NOTE! No RF-input is allowed to feed when calibrating !

Choose “OK” and “Start”, tuning begins automatically at the EGSM900 band.

Press “Start”

Other manuals for Nokia NHM-1 Series