NHM-1
CCS Technical Documentation
Page 74 Copyright Nokia. All rights reserved. Issue 1 11/03
WCDMA Temperature Sensor Calibration
This does not require any external instruments.
• This calibration must be carried out at room temperature
• Run this component from the Phoenix menu:
Tunings/WCDMA/Temperature sensor calibration.
• This is the initial view. Press “Tune” to run the calibration.
Note: By pressing “Read”, the saved value can be read from PM
The value stored is a DC-voltage from the temperatur sensor in TEX. It’s value is the dif-
ference between the expected value for room temperature so it can be either ±.
Save tuned value into PM
To Next Page
Loading...
