Nokia NHM-1 Series - WCDMA TX Band Response Tuning

To Next Page

To Previous Page

CCS Technical Documentation

NHM-1

WCDMA TX Band Response Tuning

This alignment requires use of a power meter (“thermal” sensor) or vector signal analyser.

• Calibration is started from the Phoenix menu:

Tunings/WCDMA/TX Band Response Calibration

• Press “Start” .

• Tune the power 21 dBm at mid, low and high channels using the arrow buttons.

Press “Accept” after tuning is complete.

• Save values to PM when tuning is complete.

Note: With the “Read” - button you can check the values stored in PM.

Other manuals for Nokia NHM-1 Series