NHM-1
CCS Technical Documentation
Page 58 Copyright Nokia. All rights reserved. Issue 1 11/03
RX Band Filter Response Compensation
• RF generator needed
• RX Band Filter Response Compensation starts at EGSM (GSM900),
then continues at GSM1800 band.
• NOTE! Remember to do RX calibration before doing Rx Band Filter
Response Compensation!
• Remember to take jig and cable attenuations into account!
Select Tuning => GSM => Rx Band Filter Response Compensation
Select "Manual tuning" and “Start”
You will be asked to supply 9 different RF frequencies to the phone
Set first required frequency and level => OK
To Next Page
Loading...
