NHM-1 Company confidential
CCS Technical Documentation
Page 46 Company confidential Nokia Corporation. Issue 1 11/03
•Select Start to begin flashing.
• Follow instructions on screen as required.
If flashing is done by the FPS-8 then the software package is first transferred to the FPS-
8, this process may be slow, in which case, it is recommended that the parallel port is
configured in ECP mode. If you do not know how to change the parallel port mode con-
tact your local support.
Erasing of the phone memory is then carried out.
Finally the software package is programmed into the phone, and the user data, if
requested, is restored.
To Next Page
Loading...
