Nokia NHM-1 Series

To Next Page

To Previous Page

CCS Technical Documentation

NHM-1

• Algorithm mode:

Uplink power level ( open loop power ), ( -57 … +21 dBm )

Step size (in dB’s + or - ) and step counts for power sweeps.

Sequence is for how many sweeps wanted

Step duration is the length of the step in us (max 2550 us )

Uplink scrambling code and type can be selected here

Here the uplink data- and control channelization code

numbers and weighting can be adjusted ( 0…15 ). Code

classes for those define the bit rates ( spreading factors ).

e.g. DPDCH code class 6 stands for spreading factor 60 and

8 in DPCCH is for SF 256. These SF’s are used in 12.2.kpbs

uplink voice channel.

Uplink channel number can be changed in here ( 9612 …

9888 ).

NOTE: When settings are done, they’re enabled after

pressing ”Send”. If settings are then changed ( e.g. new

channel number ) you must press ”Stop” and ”Send” again.

Nokia NHM-1 Series - Page 85