AG 5500
Installing the AG 5500 55
Archiving Your Configuration Settings
Once you have installed your AG 5500 and established the configuration settings, you should
write the settings to an archive file. If you ever experience problems with the system, your
archived settings can be restored at any time.
Refer to the following procedures:
z “Exporting Configuration Settings to the Archive File {Export}” on page 226.
z “Importing Configuration Settings from the Archive File {Import}” on page 232.
Installing the Nomadix Private MIB
The Nomadix Private MIB is supplied on the “Accessories” CD-ROM, delivered with your
AG 5500. After importing the nomadix.mib file from the CD-ROM you will be able to view
and manage SNMP objects on your AG 5500.
Procedure
1. Import the nomadix.mib file into your SNMP client manager.
2. Connect to the AG 5500 from a node on the network that is accessible via the AG 5500’s
network port (Internet, LAN, etc.). Be sure to enable the SNMP daemon on the AG 5500
(available on the AG 5500’s CLI or Web Management Interface, under the Configuration
menu –
snmp).
3. All variables defined by Nomadix start with the following prefix:
iso.org.dod.internet.private.enterprises.nomadix
4. You should now be able to define queries and set the SNMP values on your AG 5500. If
necessary, consult this User’s Guide or your SNMP client manager’s documentation for
further details.
We recommend that you change the predefined community strings in order to
maintain a secure environment for your AG 5500.
ag5500_userguide.book Page 55 Tuesday, June 5, 2007 7:31 PM
To Next Page
