AG 5500
62 System Administration
2. Enable or disable AAA Services. If you enable AAA Services, go to Step 3, otherwise this
feature is disabled and you can exit the procedure.
3. Select a Logout IP address from the drop-down list. The list contains IP address that can
be used as the logout IP address. The default IP address is 1.1.1.1.
4. Enable or disable the XML Interface, as required.
XML (eXtensible Markup Language) is used by the AG 5500’s subscriber management
module for port location and user administration. Enabling the XML interface allows the
AG 5500 to accept and process XML commands from an external source. XML
commands are sent over the network to the AG 5500. The AG 5500 parses the query
string, executes the commands specified by the string, and returns data to the system that
initiated the command request.
5. If you enabled the XML Interface feature, enter the XML IP (server) address.
ag5500_userguide.book Page 62 Tuesday, June 5, 2007 7:31 PM
To Next Page
